Trojan SUMMIT 280 - Hardware & Tools List

6
HARDWARE & TOOLS LIST
INSTRUCTIONS FOR ASSEMBLY
• Before you start to assemble, please check the hardware packaging to make sure all parts are included.
• Basic tools, such as spanners will be provided for assembly.
(1 PC)
#A (M8 x 45 mm) (4 PCS)
#C (M8 x 16 mm) (6 PCS)
#H (M8 x 75 mm) (2 PCS)
#L (M8 x 45 mm) (4 PCS)
#D (M8 x 15 mm) (2 PCS)
#M (M8 x 43 mm) (4 PCS)
#Q (M8 x 25 mm) (2 PCS)
#J (M4 x 20 mm) (6 PCS)
#T (M4 x 25 mm) (1 PC)
#K (M3 x 15 mm) (6 PCS)