1563-18
12. FREQUENTLY ASKED QUESTIONS
Errors:
Q1. My treadmill will not start up?
Ensure the safety key is attached to the console.
Q2. E1 – Treadmill has stopped caused by the motor’s abnormality.
Restart the treadmill and check that the running belt is well lubricated and that the motor wasn’t overloaded because of
insufficient lubrication. If the error continues please contact your local Trojan Service Centre on 0861 876526
Q3. E4 – Body fat function failure (if the treadmill has this function)
Please re-start the treadmill, and make sure that both hands are holding the grip pulse sensor
Q4. E6/E7 – Incline function abnormality code.
E6 indicates that the actual incline position is beyond both the upper and lower pre-set range.
Restart the treadmill and check if the treadmill can then be operated normally. If the problem persists please contact
your local Trojan Service Centre on 0861 876526
To Next Page
Loading...
