Trojan WALKER 110 - Frequently Asked Questions

10200-17
12. FREQUENTLY ASKED QUESTIONS
1. My consol is showing LS
• Treadmill has not received a speed signal for 8 seconds.
• Turn off computer, unplug, leave for 30 seconds, then restart the treadmill.
• If the error persists please contact our call centre on 0861 876 526 (0861 TROJAN).
2. My consol is showing E1
• Memory of the consol is malfunctioning or the CPU is having accessing problems
• Turn off computer, unplug, leave for 30 seconds, then restart the treadmill.
• If the error persists please contact our call centre on 0861 876 526 (0861 TROJAN).
3. My computer consol is not working
• Checkthatyourpowercordisinyourpoweroutletandison.
• Checkthatyouhaveapowersupplytoyourhome.
• Ensurethattheconsolcomputercableshavebeenconnectedproperlyintheneckpiecewhenassemblingtheunit.
4. The consol cannot read the hand pulse signal
• Thehandpulsesensorswillnotoperatecorrectlyifyourskinisextremelydry.Moistenyourhandsandtryagain.
• Avoidmovingyourhandswhileexercisingandholdthehandspulsesensorsrmlywhileexercising.Ifyoudo
 moveyourhandswhileexercising,givethecomputerafewsecondstore-sampleanddisplayyourcorrectheart
pulse rate.
• Clean the hand pulse sensors to ensure good contact between your body and the pulse sensor.
If the error persists, please contact 0861 876 526 (0861 TROJAN).
5. My LCD is dim
• Checkifunitisindirectsunlight,moveifnecessary.Ifdisplaydoesnotimprove,pleasecontact
0861 876 526 (0861 Trojan).
5. Maintenance and cleaning.
• Useaclean,damp,softragtocleanthesurface.
• Useamilddetergenttocleanthedirtyspots.
• Donotuseasteelbrushoremeryclothtocleanthesurface.
• Immediatelyafterexercisewipeoffanysweatfromthesurfaceoftheequipment.Perspirationcontainssaltwhich
could ruin the equipment.