Need help?Do you have a question about the TRONXY X5SA-500-PRO and is the answer not in the manual?
General| Build Volume | 500 x 500 x 600 mm |
|---|---|
| Print Technology | FDM (Fused Deposition Modeling) |
| Nozzle Diameter | 0.4 mm |
| Layer Resolution | 0.1 - 0.4 mm |
| Filament Diameter | 1.75 mm |
| Max Print Speed | 150 mm/s |
| Connectivity | USB, SD Card |
| Frame Material | Aluminum |
| Weight | 25 kg |
| Bed Temperature | up to 110 °C |
| Nozzle Temperature | up to 260 °C |
| Display | Touchscreen |
| Heated Bed | Yes |
| Machine Structure | Cartesian |
| Net Weight | 25 kg |
| Supported Materials | PLA, ABS, PETG, TPU |
| Extruder Type | Single |
| Input Voltage | 110V/220V |
To Next Page
