CHAPTER 4D: EMERGE
OPERATION
Truefitness.com / 800.426.6570 / 636.272.7100 116
ADVANCED CONSOLE FUNCTIONS:
Entering Maintenance Mode:
Press and Hold the UP Incline Button (A) until the unit beeps (about 3 seconds). Then release the UP Incline Key and
Immediately press and hold the Enter Button (B) until the unit beeps again (about 3 seconds). Then release the Enter
button and when the Upper LED Display (C) reads “Maintenance Mode”, press the Enter Button (B) to enter maintenance
mode.
Maintenance Mode Navigation:
The Maintenance Mode is divided into three categories; Calibration, Diagnostics and Configuration. To select a category
use the UP and DOWN Incline Keys (A) until the category is listed in the Upper LED Display (B) and then press the Enter
button (C).
To Next Page
Loading...
