CHAPTER 4D: EMERGE
OPERATION
Truefitness.com / 800.426.6570 / 636.272.7100 118
ADVANCED CONSOLE FUNCTIONS (continued):
Diagnostics Menu:
The diagnostics menu contains various settings as well as tools used to help diagnose errors and performance issues.
Total time:
Displays an accumulative count of the total number of hours the unit has been used.
Sound:
Toggles the sound on or off.
Default Weight:
Allows users to change the default weight that appears when beginning a program.
Max Time:
Limits the amount of time that all workouts can last (does not apply to quickstart,
manual or distance workouts).
Pause Time:
This setting will limit the amount of time that a workout can be paused before it
automatically ends. By choosing the “Off” option, the unit will remain paused until the
user resumes or ends the workout.
PPD
(person present detection)
PPD Timer 1/ Timer 2
(AC drive systems only):
When Person Present Detection is enabled the treadmill will pause if it does not detect a
normal amp draw which would be indicative of the weight of the user on the treadbelt.
Timer 1 will set the amount of time before the console displays a PPD Notification and
Timer 2 will set the amount of time that the notification is displayed before the treadbelt
Cooldown:
Adjusts the length of the cooldown time at the end of a workout.
ERP Wake:
Advanced power saving options. (Requires Optional ERP board; please see ERP board
instructions for further details).
Sleep:
The amount of time the unit can be idle before entering sleep mode.
USB Save:
Enables or disables workout data exporting via the console’s USB port.
Units:
Changes between American Standard and Metric units.
Average Speed:
Will calculate the average speed used using the total hours and total miles collected in
the other options.
Total Distance:
The total distance in miles that the belt has traveled.
Fault Log
Displays a list of the last 5 faults that occurred. If multiple faults have been recorded
press the + or – keys to scroll through the list. If no faults have been recorded, the
console will display “Log Empty”
To Next Page
Loading...
