True CS400 - Page 14

CHAPTER 2: ASSEMBLY INSTRUCTIONS
Truefitness.com / 800.426.6570 / 636.272.7100 10
PRE-ASSEMBLY CHECK LIST (continued):
Hardware Pack:
Item
Description
Qty
Where Used
a
Wire Tie
3
Cables
b
Bolt M8 x 1.25 x 75mm
8
Pedestals
c
Screw M4 x 0.7 x 10mm
19
Shoulder Cover-Top and Bottom
d
Washer M8 - Internal Tooth
20
Various
e
Bolt M8 x 1.25 x 80mm
4
Hand Rails
f
Bolt M8 x 1.25 x 40mm
8
Console Rack
g
Shoulder Plates
8
Console Rack
h
Tread Belt Lubricant
1
Under Tread belt
i
T- Spanner – 8mm
1
Tread Belt Adjustment
j
Wrench 17mm
1
Hex Head Bolt – Pedestal Front
k
Hex Key – 5mm
1
Various
NOTE: Consult your TRUE Fitness TCS400 Treadmill Owner’s Manual for information related to item (h) Tread Belt
Lubricant for Tread Belt lubrication procedure and item (i) T-Spanner – 8mm for Tread belt Adjustment.
Tool Requirements:
• Hex Key – 5mm, T-Spanner-8 mm, Wrench 17mm (included with hardware kit)
• 7/16 Open End Wrench (not included)
• Long Nose Pliers (not included)
• #2 Phillips Screwdriver (not included)