23
fully tighten the two bolts
(TCS4035) on the front of the
frame to secure pedestals
fully tighten the four
bolts (PS0103) on each
pedestal to secure the
pedestals to the frame
STEP 6—TIGHTEN PEDESTALS
Tools Used in this Step
5mm Allen Wrench
17mm Wrench
Hardware Tightened in this Step/Parts Used in this Step
Part Description Qty
PS0103 BOLT, M8 X 75MM, K-298A 8
TCS4035 BOLT, M10xP1.5x25 2
1. Fully tighten the two (2) bolts on the front of the left and right pedestals.
2. Fully tighten the eight (8) bolts on the sides of the left and right pedestals.
To Next Page
Loading...
