CHAPTER 2: ASSEMBLY GUIDE
Truetness.com / 800.426.6570 / 636.272.7100 31 of 62
TREADMILL ASSEMBLY STEPS:
Step 19 Power Cord Installation:
CIRCUIT BREAKER: In the event
the current drawn by the treadmill
exceeds a specied value, the Circuit
Breaker portion of the power on/o
switch will operate. e rocker lever will
automatically release and position itself
to a position half way between on and o,
thus opening the power circuit.
If this should occur, please wait 10
minutes and then reset the Circuit
Breaker by rocking the power switch fully
to the OFF position (O), and then rocking
the power switch back to the ON position
(-). If it does not reset, or the Circuit
Breaker operates again udner normal use,
contact True Fitness at 1-800-883-8783.
Note: e above picture shows the power
switch in the OFF position (O) for reference.
Circuit Breaker Positions
220V 110V
To Next Page
Loading...
