14
The handset menu allows you to change trueCall Secure’s
settings. To access the menu, pick up the telephone, wait for
the dial tone and press the button on the top of the unit (or just
pick up the handset and dial ‘# ’).
If you have voicemail turned on, trueCall first plays back any
messages, then it plays the handset menu (you can press ’0’ to
skip the messages). trueCall then lists the options. Once you
have heard the option you want to select, just press the key -
you don’t have to listen to all the options.
The following options are available in the menus:-
1►Listen to messages (and call recordings) - Listen to the
new and saved messages. If you have a trueCall Call Recorder
memory card you can also listen to call recordings.
2►Change trusted caller list
2►1►Add a telephone number to the list - Enter the full
telephone number (including the dialling code) that you want
to add to the Trusted Callers list.
2►2► Check a number - Enter a full telephone number to
check whether it is on the trusted caller list, or Zap list, and
if it is, you have the option to delete it.
3►Change trueCall options
3►1►Call handling profile - Profiles allow you to specify
how you want trueCall to handle incoming calls. You can
choose from one of three profiles – Filter, Filter
(International), or Trusted Callers Only (pages 9 and 10).
3►2►Change Callers Code - The default Callers Code is
the last two digits of the serial number printed on the
barcode label on the underside of the unit. You can change
it to a more memorable two, three or four digit number.
3►3► Change Call recording settings
(only available if memory card is installed)
3►3►1► Incoming call settings – You can choose
how incoming calls are recorded. Options are to turn
incoming call recording off, to record selected incoming
calls, or to record all incoming calls. For more information
see the separate trueCall Call Recorder guide.
Handset menu
To Next Page
Loading...