Need help?Do you have a question about the Truma DuoControl and is the answer not in the manual?
General| Operating pressure | 30 mbar |
|---|---|
| Shut-off valve | Yes |
| Crash sensor | Yes |
| Remote indicator | Optional |
| Automatic changeover | Yes |
| Gas type | LPG |
| Power supply | 12V DC |
Identifies the unique document number and its components.
Specifies the applicability of the instructions to the DuoControl CS gas pressure regulator.
Outlines the intended audience for these instructions, distinguishing between users and experts.
Explains the meaning of various symbols and icons used within the manual.
Details the different warning levels (DANGER, WARNING, CAUTION, NOTICE) and their meanings.
Provides essential safety guidelines to prevent property damage and personal injury.
Covers safe practices for installing and connecting components of the gas system.
Explains the correct procedures for handling liquid gas and potential hazards.
Details requirements for safe operation, including installation height and PRV function.
Outlines regulations and safety measures for operating gas systems while driving.
Defines the intended use of the product and consequences of improper use.
Lists applications and uses that are prohibited for the gas pressure regulator.
Describes the gas system in the vehicle and the role of the regulator.
Details the DuoControl CS gas pressure regulator, its features, and variants.
Explains the function of the Pressure Relief Valve (PRV) in the regulator.
Describes the automatic switchover between gas cylinders and its indicators.
Details the integrated crash sensor, its triggering mechanism, and reset procedure.
Explains the purpose and use of the screw aid for tightening connections.
Recommends using a gas filter for protection against contaminants.
Locates and explains the technical data and serial number on the appliance.
Describes the information sticker affixed to the gas pressure regulator.
Provides step-by-step instructions for starting up the gas system.
Details the procedure for resetting the crash sensor's reset button.
Guides on safely changing gas cylinders, including specific valve types.
Specific steps for changing a gas cylinder fitted with a standard cylinder valve.
Specific steps for changing a gas cylinder fitted with a clip-on adapter.
Instructions for replacing high-pressure hoses, including safety precautions.
Explains how users can perform a leak test on the high-pressure section.
Details the procedure for performing a leak test on the low-pressure section, requiring expert involvement.
Provides physical dimensions of the gas pressure regulator in millimeters.
Defines the coverage and applicability of the manufacturer's warranty.
Lists conditions and actions that render the warranty void.
Outlines the procedure and necessary information for claiming warranty service.
To Next Page
