Truma DuoControl - Gas System; Product Description

DuoControlProduct description
42 EN
50020-00984 ∙ 00 ∙ 08/2022
2
1
1
1 2
1
Fig� 2
3.5 Reset button
The gas pressure regulator has a reset button� It is only needed for
the gas check�
If the black reset button is pushed in (Fig� 3-1), the gas pressure
regulator is ready for operation� This means that the gas system is
supplied with gas�
If the black reset button is protruding (Fig� 3-2), the gas pressure
regulator is not ready for operation� This means that the gas system is
not supplied with gas�
1 2
Fig� 3

Unusually strong vibrations while driving may lead to the reset
button triggering inadvertently� In this situation, the flow of gas is
interrupted� To reset the reset button, see chapter „Resetting the
reset button“)