DuoControl Product description
43EN
50020-00984 ∙ 00 ∙ 08/2022
3.6 Screw aid
The screw aid guarantees the required tightening torque� Damage to
the union or the seal is therefore prevented�
Use the included screw aid to attach and remove the high-pres-
sure hose�
Fig� 4
1 T20 Torx pin (reset)
2 Screw aid a/f 23 / KF
3 Triggering element (crash sensor)
The triggering element is supplied as standard with all gas pres-
sure regulators� However, it is not needed for this gas pressure
regulator�
3.7 Gas filter *
Chemical residues that may be contained in inferior liquid gas may
damage the gas pressure regulator, shorten its lifespan or even lead
to leaks� Truma advises using the gas filter to minimise this risk (see
www�truma�com)�
3.8 Type plate and serial number
The technical data is printed on the cap of the gas pressure regulator
(Fig� 5-1)� The serial number is printed on the housing in plain text
(Fig� 5-2) and as a QR code (Fig� 5-3)�
To Next Page
