Issue 1 – January 2020
CONTENTS
SECTION 1 – USING YOUR POWRTOUCH FREEDOM SAFELY
1.1 Safety Checks Required Prior to Using Your Powrtouch Freedom ⚠
1.2 Emergency Switch Off/Stop
1.3 Safety and Technical Awareness
SECTION 2 – OPERATION OF YOUR POWRTOUCH FREEDOM
2.1 Powrtouch Freedom Operation
2.2 Switching on the Powrtouch Freedom
2.3 Switching on the Handset
2.4 Handset Battery Replacement
2.5 Engagement of the Rollers onto the Tires
2.6 Moving the RV (Handset Operation)
2.7 Decreasing and Increasing Speed
2.8 Precision Control of the RV Using the Electronic Soft Start Function
2.9 Retraction of the Rollers from the Tires
2.10 Switching Off the Handset
2.11 Mapping (Tuning/Coding) Instructions – Given for Information Only
2.12 Fitting and Removal of Side Covers
SECTION 3 – FITTING INSTRUCTIONS
3.1 Receiving Your Powrtouch Freedom
3.2 Tooling & Equipment Required
3.3 Installing Your Powrtouch Freedom
3.4 Checking Chassis Depth
3.5 Mechanical Assembly
3.6 Electrical Assembly
3.7 Connecting to the RV Battery
SECTION 4 – LOOKING AFTER YOUR POWRTOUCH FREEDOM
4.1 Cleaning Your Powrtouch Freedom
4.2 Cleaning the Drive Rollers
SECTION 5 – WARRANTY & FAULT FINDING
5.1 Powrtouch Freedom Warranty
5.2 Reporting a Fault with Your Powrtouch Freedom
5.3 Electronics Control Box (ECB) - LED Status
5.4 Checking the Charge State of Your 12 Volt Battery
5.5 Fault Finding on Your Powrtouch Freedom
Symbols used
Symbol indicates a warning
Note containing information
To Next Page
Loading...
Need help?
General
