Why is my Truma Mover XT4 manoeuvring system remote not working properly?
If your Truma Automobile Accessories manoeuvring system isn't responding to the remote or is only working intermittently, it could be due to a low battery in either the remote control or the manoeuvring system itself. Check the battery charge of both. If necessary, charge or replace the battery.
What to do if Truma Automobile Accessories manoeuvring system is not working?
If the Truma Automobile Accessories manoeuvring system isn't working, first check the power supply. Ensure the green LED on the control unit is lit. Also, check the fuse in the battery connection cable and replace it with an original Truma spare part (part no. 60040-00169) if it's defective. If this doesn't resolve the issue, try interrupting the power supply for at least 20 seconds, then restore it and check if the green LED on the control unit is lit.
What to do if Truma Mover XT4 manoeuvring system is not working and red LED is flashing?
If your Truma Automobile Accessories manoeuvring system isn't working and the red LED on the control unit is flashing, the control unit may be overheated. To resolve this, interrupt the power supply using the battery cut-off switch and remove the key. Allow the control unit to cool down for at least 20 minutes before restarting the manoeuvring system.
How to fix Truma Mover XT4 Automobile Accessories drive roller sliding off tyre?
If the drive roller is sliding off the tyre on your Truma Automobile Accessories, check the tyre pressure and adjust it if needed. Inspect the tyre tread and replace the tyres if necessary. Also, disengage the manoeuvring system and measure the gap between the tyres and drive roller, ensuring it is 20 mm.
General| Power supply | 12 V DC |
|---|---|
| Remote control | Yes |
| Automatic engagement | Yes |
| Number of Motors | 2 |
| Suitable for | Caravans and trailers |
| Drive | Electric |
| Installation | Chassis-mounted |
| Type | Electric trailer mover |
Identifies the document number.
Specifies the applicability of the instructions.
Defines the intended users of the instructions.
Explains symbols and visual indicators used.
Details types of warnings and their meanings.
Lists and defines technical terms and abbreviations.
Lists items included with the product.
Lists optional or additional parts.
Outlines general safety precautions and risks.
Details responsibilities of the user.
Provides guidelines for safe usage.
Instructions for handling system errors or failures.
Describes the correct and intended application of the system.
Lists prohibited or incorrect uses of the system.
Specifies requirements for installation and modifications.
Details the system's installation and components.
Information on product identification labels.
Explains the system's operational capabilities.
Information on power sources and requirements.
Details the functions of the remote control.
Explains remote control indicators and sounds.
Instructions for changing batteries in the remote control.
Describes the auto-off function of the remote.
How to turn off the remote control, including emergency stop.
Steps to disconnect the caravan from the towing vehicle.
Procedure for activating the manoeuvring system.
Information about the main power isolator.
Details the caravan's safety socket connection.
Steps to power on the remote control unit.
How to connect the drive rollers to the caravan wheels.
Instructions for moving the caravan.
Steps to attach the caravan to the towing vehicle.
How to disconnect the drive rollers from the wheels.
Manual procedure to disengage drive rollers.
Procedure to turn off the entire system.
How to turn off the remote control.
Details about the safety socket connection.
Information on the battery cutoff switch.
Steps to diagnose and resolve common issues.
Steps to re-establish remote control connection.
Guidelines for maintaining the 12V battery.
Instructions for caring for the remote control.
Advice on maintaining caravan tyres.
How to maintain the drive units.
General maintenance of the manoeuvring system.
Specific advice on tyre maintenance.
Information on control unit upkeep.
How to check roller-tyre clearance.
Preparations for long periods of non-use.
Risks and precautions for repair work.
Guidelines for proper disposal of the system.
Proper disposal of remote control and batteries.
Product name and type.
Specifies the intended application and limits.
Indicates the maximum incline the system can handle.
Specifies the required voltage for operation.
Details the peak power draw of the system.
Indicates typical power usage.
Current draw when idle.
Specifies the system's maximum operational speed.
Specifies the system's weight.
Details the main fuse rating.
Specifies the communication frequency.
Details the type of batteries used.
Details of the warranty coverage.
Conditions under which the warranty is void.
Procedure for submitting a warranty claim.
To Next Page
