Need help?Do you have a question about the Truma Mover smart M RS1 and is the answer not in the manual?
General| Brand | Truma |
|---|---|
| Model | Mover smart M RS1 |
| Category | Automobile Accessories |
| Language | English |
Details the document number for the installation instructions.
Specifies the validity of these operating instructions.
Identifies the intended audience for these installation instructions.
Lists related documents for additional information.
Explains symbols and displays used in the instructions.
Provides information on how warnings are used and their meaning.
General safety guidelines for installation work.
Safety precautions for handling fuels during installation.
Safety guidelines for working with electrical systems.
Safety measures for 230 V AC power supplies in vehicles.
Safety precautions for 12 V DC vehicle power supply.
General device safety instructions.
Instructions that must be observed directly on the device.
Importance of safety devices being present and functional.
Guidelines on using genuine spare parts and avoiding damage.
Notes on caravan load capacity and technical modifications.
Distinction between L-profile and U-profile frames for installation.
Procedure for measuring the caravan frame height for installation.
Guide to selecting installation type and necessary accessories.
Requirements for standard installation on U-profile or L-profile chassis.
Using spacer kits for height compensation on chassis.
Using low chassis kits for height compensation on caravans.
Adapter kit for AL-KO Vario III / AV chassis.
Adapter kit for Tabbert/Dyonic chassis AB3 (1500 kg).
Adapter kit for Knaus Tabbert/Dyonic chassis AB3/AB4 (2000 kg).
Adapter kit for AL-KO M short chassis (up to 1800 kg).
Adapter kit for AL-KO M chassis (up to 1800 kg).
Adapter kit for AL-KO M chassis (1900-2000 kg).
Essential adapter kit for Eriba Touring chassis.
Essential adapter kit for Eriba Touring Troll chassis.
Short mounting system for L-profile chassis with limited space.
Information on mudflap installation and adaptation.
Instructions for cutting and adapting mudflaps for the system.
Determining installation locations for components like battery and control unit.
Step-by-step guide to fitting the drive units.
Steps before fitting drive elements, including packing and component checks.
Ensuring adequate ground clearance during drive unit installation.
Procedure for attaching drive units to the connection pipe.
Correctly positioning drive units and mounting system on the frame.
Setting the correct distance between tyres and drive rollers.
Verifying required distances after initial mounting.
Securing the movable connection pipe.
Permanently fixing the mounting system to the vehicle frame.
Installing the cross actuation device for the drive rollers.
Guidance on wiring the control unit and system components.
Diagrams and instructions for connecting electrical components.
Installation and connection of the battery cut-off switch.
Procedure and safety precautions for connecting the battery.
Final tasks after the function test, including securing cables and handover.
To Next Page
