Mover smart M RS1 Function check
33EN
60040-00463 ∙ 00 ∙ 09/2023
Apply the caravan’s parking brake or secure it with
chocks to prevent it from rolling away�
Disengage the drive rollers using the engagement
lever and switch o the remote control�
Re-check the distance between the drive roller and
tyres� Readjust if necessary�
7.1 Final steps
After the function test:
Secure cables with cable ties�
Seal cable glands in the vehicle floor with plastic
body sealant�
Attach the yellow sticker with the warnings in a
location in the vehicle where it is clearly visible to all
users (e�g� the wardrobe door)�
Missing stickers can be requested from the service
department�
Handover to the customer:
•
Remote control including batteries
•
20mm spacer plate
•
Operating instructions for the manoeuvring system
•
Engagement lever
To Next Page
Loading...
