EasyManua.ls Logo

Trynex Sweepex SWB-400 - Introduction

Default Icon
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3© TrynEx International 2013 (REV A) F51231A
Introduction
This operating manual is intended to help you to get to know the SWB-400 and how to operate it safely, correctly and economically. If you
observe these instructions, you will prevent hazards, reduce repair costs and breakdown times, and increase the reliability and service life of
the machine.
This manual must be read and used in conformity to existing workplace regulations. The manual must be made available where the machine
is being used.
The manual must be read and used by every person who will be working with or on the machine, such as for
Operation (including preparation, repair during operation, & clean-up)
Repairs (maintenance, inspection, overhaul), and/or
Transport.
All established technical regulations for safety and proper working practice must be observed in addition to this manual and any applicable
regulations for the prevention of accidents. Should you lose your Owner’s Manual or would like extra copies, they can be purchased at your
SweepEx dealer.
THIS SIGN SHOULD ALERT YOU:
This Safety Alert Symbol is used to pinpoint characteristics that, if not carefully followed, can create a safety
hazard. When you see this symbol in this manual or on the machine itself, be alert! Your personal safety and
the safety of others is involved.
Dened below are the Safety Alert Messages.
DANGER
Information that, if not carefully followed, can cause death.
WARNING
Information that, if not carefully followed, can cause serious personal injury or death.
CAUTION
Information that, if not carefully followed, can cause minor injury or damage to equipment.
IMPORTANT
This symbol is used to call out information that is important to follow carefully.
Note: Some of the photos in this manual show the SWB-400 with optional accessories or brush kits.
IMPORTANT EQUIPMENT INFORMATION
Record important machine information here for quick reference. This information can be found on the serial number plate located at the back
of the machine on the wheel drive enclosure.
Model _______________________________________
Serial # _______________________________________
Engine Model ________________________________
Engine Serial # ________________________________
Date Purchased ________________________________
Dealer where purchased
_______________________________________________
See separate Warranty Information Card for your warranty coverage.
Model: SWB-400
Engine: Honda GXV160
HP: 5.5
Weight: 205 lbs Manuf. 2013
Serial No. R40-0913830001
TrynEx International LLC
531 Ajax Drive
Madison Heights MI 48071
USA
Example