S1/S2 Assembly Instructions – Rev N Page 26
Cleaning
Clean products regularly according to infection control guidelines and
protocols. Capsa Healthcare products are designed to be chemical and spill-
resistant and easy to clean. Components are manufactured from the highest
grade, non-porous, chemical resistant ABS (acrylonitrile, butadiene and
styrene) plastic, and from smooth, chemical resistant powder-coated steel and
aluminum. Although high-touch components (work surface, handles, wrist rest)
on certain products incorporate anti-microbial additives, it is not recommended
to rely solely on those additives for infection control and proper hygiene.
Most common disinfectant wipes and diluted cleaning solutions that are safe to
use in patient care environments are also acceptable to use for cleaning
products' exterior surfaces.
Recommendations
• Wear the required PPE (Personal Protective Equipment)
• Understand the precautionary statements
• Follow the directions for use, including pre-cleaning instructions
• Follow the contact guidelines
• Refer to the SDS (Safety Data Sheet) as necessary
• Consult your Infection Control Administrator for cleaning procedures and
processes
• Clean plastic components with diluted, non-abrasive solutions
• Remove pen and dry erase marker stains with a soft cloth and 91%
isopropyl alcohol
• Remove iodine stains with a soft cloth and any of the suggested cleaners
• Allow your cart to dry completely before plugging the power cord into a
wall outlet
• When cleaning the cart, wipe off the surface with a damp cloth and
thoroughly dry
• Avoid excess dampness and never immerse the cart or its components in
liquid or allow liquids to flow into the cart
• Never use steel wool or other abrasive materials as these could damage
the surface finish
• Before using any cleaner on the cart, first test it on a small area to ensure
that the surface is not harmed
To Next Page
Loading...