TSC DA320 Series User Manual

- 24 -
4.2.2 Dump mode
Printer will enter dump mode after printing printer configuration. In the dump mode, all characters will
be printed in 2 columns as following. The left side characters are received from your system and right
side data are the corresponding hexadecimal value of the characters. It allows users or engineers to
verify and debug the program.
Note:
1. Dump mode requires 4” wide paper width.
2. Turn off / on the power or press FEED button to resume printer for normal printing. (Ready
mode)
ASCII Data
Hex decimal data related to left
column of ASCII data

TSC DA320 Series Specifications

General

Brand	TSC
Model	DA320 Series
Category	Barcode Reader
Language	English