EasyManuals Logo
Home>TSC>Barcode Reader>MX341P Series

TSC MX341P Series User Manual

TSC MX341P Series
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
- iv -
Caution: Hot surface for printhead.
Do not touch the printhead before it cooling.
WARNING:
Remove the power from AC inlet before opening the media cover for cleaning or repairing faults. After
cleaning or fixing faults, media cover closing before power connecting to AC inlet.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the
user's authority to operate the equipment.
CE Statement:
This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20 cm between the radiator &
your body.
All operational modes:
2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40)
5GHz: 802.11a,
The frequency, mode and the maximum transmitted power in EU are listed below:
2400 MHz 2483.5 MHz: 19.88 dBm (EIRP)
5150 MHz 5250 MHz: 17.51 dBm (EIRP)
5150-5350MHz for Only indoor use
5470-5725MHz for indoor/outdoor use
Restrictions In AZE
National restrictions information is provided below
Frequency Band
Remark
5150-5350MHz
No license needed if used indoor and
power not exceeding 30mW
5470-5725MHz
Hereby, TSC Auto ID Technology Co., Ltd. declares that the radio equipment type [Wi-Fi] IEEE 802.11
a/b/g/n is in compliance with Directive 2014/53/EU

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TSC MX341P Series and is the answer not in the manual?

TSC MX341P Series Specifications

General IconGeneral
BrandTSC
ModelMX341P Series
CategoryBarcode Reader
LanguageEnglish

Related product manuals