TSC MX341P Series User Manual

- 48 -
7.5.2 Ethernet
Use this menu to configure internal Ethernet configuration check the printer’s Ethernet
module status, and reset the Ethernet module.
Item
Description
Default
Status
Use this menu to check the Ethernet IP address and
MAC setting status.
N/A
Config
DHCP:
This item is used to ON or OFF the DHCP (Dynamic
Host Configuration Protocol) network protocol.
Static IP:
Use this menu to set the printer’s IP address, subnet
mask and gateway.
DHCP
Menu Interface Ethernet
Status
Config

TSC MX341P Series Specifications

General

Brand	TSC
Model	MX341P Series
Category	Barcode Reader
Language	English