TSC Printronix TE200 Series - Media Specification

8
1.5 Media Specification
TE200
(203 dpi model)
TE300
(300 dpi model)
TE210
(203 dpi model)
TE310
(300 dpi model)
Label roll capacity
Max. 5” OD
Media type
Continuous, die-cut, black mark, fan-fold, notch
Media wound type
Outside wound
Media width
20mm ~ Max. 112 mm
Media thickness
0.06 mm (2.36 mil) ~ 0.19 mm (7.48 mil)
Media core diameter
1” (25.4 mm) & 1.5” (38 mm) ID core
Label length
5 mm ~ Max. printing length
Label length (peeler mode)
N/A
1" ~ 6" (25.4 ~ 152.4 mm)
Label length (cutter mode)
N/A
1" ~ Max. printing length
Gap height
Min. 2 mm (0.09”)
Black mark height
Min. 2 mm (0.09”)
Black mark width
Min. 8 mm (0.31”)