TSC Printronix TE200 Series - Loading the Ribbon

14
3.2 Loading the Ribbon
1. Open the printer top cover by pressing the top cover
open tabs and pulling up.
2. Open the ribbon access cover and the media cover.
Insert the paper core to the ribbon rewind spindle.
Note: Please follow the direction when
installing the ribbon rewind spindle.
3. Insert the right side of ribbon rewind spindle first.
Then, insert the left side to the hole at the left side
of ribbon rewind hub (green).
Note:It can also be substituted by 0.5 or 1 inch
paper roll with notches on both sides. Please
insert it at the ribbon rewind hub directly.
L
R