SD card reader (Reserve a PIN connector for updating firmware by card
when doing maintenance.)
One button for feed and pause
One LED indicator for 3 colors
Standard industry emulations right out of the box including Eltron
®
and
Zebra
®
language support
Internal 8 alpha-numeric bitmap fonts
Fonts and bar codes can be printed in any one of the four directions (0,
90,180, 270 degrees)
Internal Monotype Imaging® true type font engine with one CG
Triumvirate Bold Condensed scalable font
Downloadable fonts from PC to printer memory
Text, bar code, graphics/image printing (Please refer to the TSPL/TSPL2
programming manual for supporting code page)