TSC TE300 series User Manual

12
4. Push the print head release button to
open the print head mechanism.
5. Insert the ribbon to the ribbon
spindle.
Note: The ribbon spindle can be
substituted by insert the ribbon
with notches on both sides to the
ribbon mechanism directly.
6. Insert the right side of ribbon supply
spindle (marked “R”) to the ribbon
supply hub first. Then, insert the left
side of ribbon supply spindle to the
hole at the left side of ribbon supply
hub (green).
OPEN

TSC TE300 series Specifications

General

Brand	TSC
Model	TE300 series
Category	Barcode Reader
Language	English