TSC TT045-50 Series User Manual

12
4. Close the peel-off module. Use the
DiagTool to set the peel-off mode
by selecting “PEEL” option for
Post-Print Action setting then click
“Set” button to enable the peel-off
mode.
5. Close the print head mechanism
and printer cover. Printer is ready
for peel-off mode.
6. Press the FEED button to test.
Note:
Please calibrate the gap/black mark sensor when changing media.
Liner
Liner
Label

TSC TT045-50 Series Specifications

General

Brand	TSC
Model	TT045-50 Series
Category	Barcode Reader
Language	English