To Next Page

To Previous Page

3.3.3 Loading the Media in Cutter Mode (Option)

1. Refer to chapter 3.3.1 to install the

label.

2. Lead the media through the cutter

paper opening.

3. Close the print head mechanism

and printer cover. Use the DiagTool

to set the printer for cutter mode by

selecting “CUTTER” option for

Post-Print Action setting then click

“Set” button to enable the cutter

mode. Press the FEED button to

test.

Note:

Please calibrate the gap/black mark sensor when changing media.

TSC TT045-50 Series User Manual

Questions and Answers: