2-4 AeroTrak
®
Handheld Airborne Particle Counters
5. Plug the DC end of the transformer cord into the counter.
6. Plug the AC end of the transformer cord into an AC outlet.
7. The Power LED lights when the battery is charging. When the Power
LED is off, the battery is fully charged.
8. When the battery is charged, unplug the power supply.
Quick S t a rt
The best way to quickly get started is to refer to the printed “Quick Start
Guide” included with your instrument. It will help you to quickly set up the
instrument and begin sampling. Refer to the sections below for more
detailed information on configuring and running the instrument.
To Next Page
Loading...
