TTControl Vision 312 - User Manual

Vision 312
User Manual
Product Version 00.09
Original Instructions
Document type: User Manual
Document number: D-156-G-02-001
Document revision: 0.7.1
Document date: 2020-03-16
Security: Corporate confidential
Status: Released
TTControl GmbH
Schoenbrunner Str. 7, A-1040 Vienna, Austria,Tel. +43 1 585 34 34 – 0, Fax +43 1 585 34 34 – 90, office@ttcontrol.com
No part of the document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the
written permission of TTControl GmbH. Company or product names mentioned in this document may be trademarks or registered trademarks of their
respective holders. TTControl GmbH undertakes no further obligation or relation to this document.
© TTControl GmbH 2020. All rights reserved.
Confidential and Proprietary Information
Subject to changes and corrections.

Summary

Disclaimer

1 General Description

1.1 Introduction

Overview of Vision 312 family products.

1.2 Notation

Definition of terms used in the document.

1.3 Advanced Programming Possibilities

Details on programming Vision 312.

1.4 Features

Comparison of Vision 312 family product features.

2 Instructions for Safe Operation

2.1 General Safety Instructions

General safety instructions for operating the device.

2.2 Intended Use

Specifies the intended applications for the Vision 312.

2.3 Improper Use

Describes prohibited uses of the device.

2.4 Pre-Commissioning Checks

Pre-commissioning checks for safe operation.

2.5 Disposal Guidelines

Guidelines for proper device disposal.

3 Standards and Guidelines

4 Standard Compliance

4.1 Regulatory Information

FCC compliance and regulatory information.

5 Connectors and Pins

5.1 Available Connectors

Overview of available connectors on the device.

5.2 Main Connector C1

Detailed pinout of the main connector (C1).

5.3 Ethernet Connectors

Pinout for 100BASE-T1 and 100BASE-TX connectors.

5.4 USB Connectors

Pinout for USB OTG and USB Host connectors.

5.5 Connector C

Information about connector C.

6 Specification of Inputs and Outputs

6.1 Positive Power Supply BAT+

Details on the positive power supply input.

6.2 Negative Power Supply BAT-

Details on the negative power supply input.

6.3 Ignition On Switch Terminal 15

Details on the Terminal 15 input signal.

6.4 External Wake-up

Functionality of the external wake-up input.

6.5 Service Enable

Details on the Service Enable function.

6.6 100 BASE-TX Interface

Technical specifications for the 100BASE-TX Ethernet interface.

6.7 100 BASE-T1 Interface

Technical specifications for the 100BASE-T1 Ethernet interface.

6.8 USB OTG Interface

Technical specifications for the USB OTG interface.

6.9 USB Host Interface

Technical specifications for the USB Host interface.

6.10 RS-232 Interface

Technical specifications for the RS-232 serial interface.

6.11 CAN Interface

Technical specifications for the CAN interface.

6.12 Analog Video Input

Specifications for analog video inputs.

6.13 Camera Supply

Details on camera power supply outputs.

7 Internal Structure

7.1 Temperature Sensors

Information about device temperature sensors.

7.2 Speaker

Details about the device's speaker.

7.3 Real-Time Clock RTC

Information about the real-time clock functionality.

7.4 Memory

Overview of the device's memory types.

8 Power Modes

9 Device Front

9.1 Display

Specifications of the device's display.

9.2 Ambient Light Sensor

Details on the ambient light sensor.

9.3 Status LED

Information about the status LED.

9.4 Touchscreen

Specifications and operation of the touchscreen.

9.5 Optical Bonding

Explanation of optical bonding for the display.

9.6 Appearance

Acceptance criteria for cosmetic appearance.

9.7 Cleaning

Instructions for cleaning the device.

10 Connectors and Cable Specifications

10.1 Plug Housings

Recommended plug housings for connectors.

10.2 Receptacle Contacts

Recommended receptacle contacts for connectors.

10.3 Cavity Plugs and Blind Plugs

Recommended cavity and blind plugs.

10.4 Tools

Recommended tools for connector assembly.

10.5 Cables

Recommended cables for mating connectors.

11 References

11.1 Referenced Norms and Standards

List of referenced norms and standards.

12 Glossary

TTControl Vision 312 Specifications

General

Brand	TTControl
Model	Vision 312
Category	Touchscreen
Language	English