3.0 Set Up and Positioning
In the following chapters details instructions for set up and positioning of the Iso-Force system for the
standard test and exercises. For every joint pattern there is a quick reference guide to help you make
the gross positioning. However, depending on the anatomical features of your subject further set ups
will be needed in order to ensure proper alignment and comfortable position.
You are strongly advised to perform several trials with healthy subjects in order to get familiar with the
positioning required for each joint pattern.
In the Iso-Force software you can find additional photos for each position that can help you and guide
you during an actual testing.
Start Up
Press the ON/OFF button at the front panel of your computer. Wait a few minutes to ensure that the
Windows are fully loaded.
Double click on the isoforce shortcut at the desktop.
The isoforce main menu appears in your screen.
Shut Down
Exit the software by right clicking on the exit button at the main menu.
To shut down your computer:
1. Select Start at the lower left side of your desktop
2. Select Turn off Computer from the appearing start menu
3. Select Shut Down to terminate operation
To Next Page
Loading...