Opposite Side
Unstrap patient's knee from attachment.
While the patient is still seated, slide the chair away from the dynamometer.
Remove the knee attachment from the dynamometer input arm and put it back turning it
around.
Remove the contra lateral adapter from the central receiving tube of the chair and put it the
other way around.
Adjust the chair and the dynamometer to align the subject
Follow the steps 6 -9 as described above.
Attention! Instruct your patient to hold the emergency stop during the test or the exercise, in order
to instantaneously terminate the operation in any mode in case he/she feels pain or disturbance.
Prone Position / this positioning ensures a wider ROM
Attachments Needed
Dynamometer: Knee Adaptor (ADL3) with single or double knee pad
To Next Page
Loading...