EasyManua.ls Logo

TurboChef 3240 - Page 21

TurboChef 3240
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CLEANING
7
Step 7: Remove and Clean the Conveyor (requires TWO people)
-Position one person at each end of the conveyor.
-Lift the conveyor assembly up and then towards the left side of the oven until
the conveyor drive chain has enough slack for removal.
-Remove the conveyor drive chain.
WARNING: Never attempt to remove the conveyor with fewer than 2 people.
-Lift the conveyor and push it through the right side of the oven for removal.
-Wash, rinse, and dry the conveyor with a clean towel.
Step 8: Remove and Clean the Lower End Panels
-Remove both lower end panels from each end of the oven.
-Wash and rinse the lower end panels, then dry them with a clean towel.
Step 9: Remove and Clean the Upper Nozzle Plate
-Remove the thumbscrew holding the upper nozzle plate in place on the right side
-of the oven (located between the two handles). If the right side upper air diverter is
-incorrectly positioned in front of the lip of the upper nozzle plate, remove the right
-side upper air diverter.
-Spray the upper nozzle plate with TurboChef Oven Cleaner to break apart any
-heavy stains. Allow cleaner to penetrate stains for five minutes.
-Scrub the upper nozzle plate with a nylon scrub pad.
-Rinse the upper nozzle plate with water and wipe it with a clean, damp towel.
WARNING: Be sure to THOROUGHLY remove all cleaner residue.
Step 10: Remove and Clean the Right and Left Lower Air Diverters
-Remove the four thumbscrews from the right side lower air diverter.
-Remove the right side lower air diverter.
-Remove the two thumbscrews from the left side lower air diverter.
-Remove the left side lower air diverter.
-Wash and rinse the lower air diverters, then dry them with a clean towel.
Step 11: Remove and Clean the Lower Plenum Assembly
-Remove the lower plenum assembly from the right side of the oven.
-Spray the lower plenum assembly with TurboChef Oven Cleaner to break
-apart any heavy stains. Allow cleaner to penetrate stains for five minutes.
-Scrub the lower plenum assembly with a nylon scrub pad.
-Rinse the lower plenum assembly with water and wipe it with a clean, damp towel.
WARNING: Be sure to THOROUGHLY remove all cleaner residue.
Step 7
Step 8
Step 9
Step 10
Step 11
Right
Left

Table of Contents

Related product manuals