TurboChef 3240 - Page 84

A-10 APPENDIX A - REPLACING OVEN COMPONENTS
Geared Hub
Sprocket, 1” Bore
Spur Gear, 3.5 PD, 5/8-inch Bore
Gear Drive, Dual Belt
Nutplate, Drive Bracket
Plate, Conveyor Drive, Double
Weldment, Bracket, Split Belt
Weldment, Shaft,
Internal Drive
Panel, Conveyor Drive
Spur Gear, 2.75 PD,
1/2-inch Bore
Weldment, Bracket,
Single Drive
Weldment, Shaft,
Internal Drive
Panel, Conveyor Drive
Spur Gear, 3.5 PD,
5/8-inch Bore
Collar, 5/8-inch Shaft
Gear Drive, Single Belt
Nutplate, Drive Bracket
Bolt Retainer Bracket
Gear Drive Assembly Detail