TurboChef 3240 - Page 85

APPENDIX A - REPLACING OVEN COMPONENTS
A-11
Item Part Number Hardware Description Hardware Part
Number(s)
Bolt Retainer Bracket HHC-6426 None N/A
Collar, 5/8-inch Shaft 100257 None N/A
Gear Drive, Dual Belt HHC-4120 Washer, Thrust, 5/8” ID x 1/16 THK
Screw, 1/4-20 x 3/4 Lg, PHTRHD, SS
Nut, 1/4-20, Serrated Hex Flange, Plated Steel
103470 (x1 each)
101399 (x4 each)
100906 (x4 each)
Gear Drive, Single Belt HHC-6538 Nut, 1/4-20, Serrated Hex Flange, Plated Steel
Screw, 1/4-20 x 3/4 Lg, PHTRHD, SS
Washer, Thrust, 5/8” ID x 1/16 THK
100906 (x4)
101399 (x4)
103470
Geared Hub HHC-6607 Washer, Thrust, 5/8” ID x 1/8 THK
Washer, Thrust, 1” ID x 1/16 THK
103471
103472
Nutplate, Drive Bracket HHC-6396 None N/A
Panel , Conveyor Drive HHC-6301 Nut, 1/4-20, Serrated Hex Flange, Plated Steel
Screw, 1/4-20 x 3/4 Lg, PHTRHD, SS
100906 (x4)
101399 (x4)
Plate, Conveyor Drive, Double HHC-6467 None N/A
Sprocket, 1" Bore 101906 None N/A
Spur Gear, 2.75 PD, 1/2-inch Bore 101895 None N/A
Spur Gear, 3.5 PD, 5/8-inch Bore 101903 Screw, Set, SKT, CUP PAWL, 1/4-20 x 1/2 Lg 101719 (x1 each)
Weldment, Bracket, Single Drive HHC-6557 None N/A
Weldment, Bracket, Split Belt HHC-6309 None N/A
Weldment, Shaft, Internal Drive HHC-6306 Washer, Thrust, 5/8” ID x 1/8 THK 103471