GENERAL
TEST CONSIDERATIONS – ALL TESTS:
Power Supply Connections
Unless otherwise specified in the individual test methods, the appliance was
connected to a 240 volt source of supply at 60 Hz.
This supply connection was based on
[X] The marked voltage rating
[ ] The highest voltage of the applicable range of voltages
RISK ANALYSIS RELATED TO TESTING PERFORMANCE:
The following types of risks have been identified. Take necessary
precautions. This list is not all inclusive.
[X] Electric shock [ ] Radiation
[X] Energy related hazards [ ] Chemical hazards
[ ] Fire [ ] Noise
[X] Heat related hazards [ ] Vibration
[ ] Mechanical [ ] Other (Specify)__
To Next Page
Loading...
