TEST EQU
IPMENT INFORMATION
Inst.
ID No.
Instrument
Type
Test Number +, Test
Title or
Conditioning
Function
/Range
Last Cal.
Date
Next Cal.
Date
+ - If Test Number is used, the Test Number must be identified on the data
sheet pages or on the Data Sheet Package cover page.
The following additional information is required when using client’s or
rented equipment, or when a UL ID Number for an instrument number is not
used. The Inst. ID No. below corresponds to the Inst. ID No. above.
Inst.
ID No. Make/Model/Serial Number/Asset No.
[X]UL test equipment information is recorded on Meter Use in UL’s Laboratory
Project Management (LPM) database.
TEST SAMPLE IDENTIFICATION:
The table below is provided to provide correlation of sample numbers to
specific product related information. Refer to this table when a test
identifies a test sample by "Sample No." only.
Sample Card
No.
Date
Rec
eived
Test
No.+
Sample
No. Manufacturer, Product Identification and Ratings
1284753 2012-01-
13
ALL 1 Turbochef Technologies Inc., Model HHB2,
rated 240 V, 6900 W.
To Next Page
Loading...
