EasyManuals Logo

turbofan E23D3 User Manual

turbofan E23D3
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Programming
14
6. SET COOK TIME.
*Right Display flashing*
Rotate ‘Timer’ knob clockwise to select time required.
‘+’ to increase Cook Time (Max. 180 minutes).
‘-’ to decrease Cook Time (Min. 1 minute).
Select ‘InF’ for infinite cooking time.
 By setting Infinite Time setting (‘InF’), Oven counts time upwards up to a limit of 999 minutes. The Infinite (‘InF’) timer
option is only available as an option when setting the last stage of a program. If the ‘InF’ timer option is programmed, no
stages after the ‘InF’ stage will be available / visible. Turn ‘Off’ all stages that come after a given stage in order to set an ‘InF’
timer for that stage.
Press ‘Program’ key to confirm Timer setting, controller will step to steam level setting.
7. SET STEAM LEVELS (St0 - St5).
*Left Display shows *.
*Right Display flashing*
Rotate ‘Timer’ knob to select Steam level required.
‘+’ to increase steam level (Max 5).
‘-’ to decrease steam level (Min 0).
(Refer to the Operation section, ‘Steam Mode’, for additional explanation of steam level settings).
Press ‘Program’ key to confirm steam level setting. Controller will step to ‘End of Stage Alarm’ setting.
8. SET ‘END OF STAGE’ ALARM (‘ON-OFF’).
*Left Display shows *.
*Right Display flashing*.
Rotate ‘Timer’ knob to select ‘End of Stage’ alarm state required.
‘+’ = ‘ON’ - Alarm will sound at completion of cooking stage, program is paused awaiting user action. Refer to
‘Operation’ section, ‘Cooking in Program Mode’ - ‘Acknowledging an End of Stage Alarm’.
‘-’ = ‘OFF’ - Oven will continue on to the next cooking stage without sounding an alarm.
NOTE: Regardless of the setting applied to the last stage of the program, a program ‘Time Up’ Alarm will sound to indicate the
end of the program.
Press ‘Program’ key to confirm alarm option. A beep will sound to confirm that all stage parameters have been set.
= No time set and Stage is ‘OFF’.
= Infinite Time Setting.
Time = From 1 minute to 180 minutes.
Turn and Release Timer Knob to change
selection.
Hold Knob to Fast Forward / Fast Reverse.
  
1 Min
180 Mins

Other manuals for turbofan E23D3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the turbofan E23D3 and is the answer not in the manual?

turbofan E23D3 Specifications

General IconGeneral
Brandturbofan
ModelE23D3
CategoryOven
LanguageEnglish

Related product manuals