turbofan EC40D7 User Manual

12
5.1 • TURNING THE OVEN ON
Press knob 1 for 3 seconds. If an error
code appears on displays 7-8, see “Section
22 - Self-Diagnosis and Error Guide".
5.2 • SELECTING THE COOKING LEVEL
WITH CORE PROBE
Press button 11, display 8 will read SP.
5.3 • SELECT THE COOKING MODE
Leds on cooking mode buttons flashing:
press the desired cooking mode button
(2 - 3 - 4) and start cooking. The cooking
mode led will remain lit with a fixed light.
Cooking will begin, display 8 will read [50°],
indicating a pre-set core temperature of
50°C.
5.4 • SETTING THE TEMPERATURE
Press button 6, the temperature will flash
on display 7. Rotate knob 1 to set the
temperature (right to increase, left to
decrease), which will be shown on the
display.
Press button 6 to confirm, or wait 10
seconds to confirm the set temperature.
Display 7 will now show the current
temperature in the cooking chamber.
5.5 • SETTING THE CORE PROBE
Press button 10, display 8 will show the
probe temperature. Turn knob 1 to set
the temperature (right to increase, left to
decrease), which will be shown on display
8.
Press button 10 to confirm, or wait
10 seconds to confirm the set probe
temperature.
See “Section 14 - Setting the Core Probe".
NOTE: While cooking, if it becomes
necessary to switch to timed cooking,
press button 9 and set the desired time.
Press button 9 to confirm, or wait 10
seconds for the set time to be registered.
Insert products for cooking into cooking
chamber and insert core probe.
Also see “Chapter 14 - Setting the Core
Probe”.
Now...
display 7 shows the real temperature of the
cooking chamber.
Display 8 shows the temperature of the
core probe.
5.6 • COOKING COMPLETE
When the pre-set probe temperature has
been reached, an acoustic signal will notify
that cooking is complete.
To stop the sound, simply open the door or
turn knob (1).
Remove the product from the cooking
chamber in accordance with instructions
in paragraph 2.7 of the chapter “Special
instructions”.
Viewing and changing saved values
If it becomes necessary to check the set
values during cooking, press button 11, the
displays will flash.
Wait 10 seconds for the real values to
reappear.
If the displayed values need to be changed,
follow the instructions in paragraphs 5.3
and 5.4.
5 • MANUAL SETTINGS FOR COOKING WITH PROBE
OPERATIONS
240066-1

turbofan EC40D7 Specifications

General

Brand	turbofan
Model	EC40D7
Category	Oven
Language	English