turbofan EC40D7 User Manual

13
6.1 • TURNING THE OVEN ON
Press knob 1 for 3 seconds. If an error
code appears on displays 7-8, see “Section
22 - Self-Diagnosis and Error Guide".
Note: cooking with
sequential cycles allows the pre-heating
of the empty cooking chamber, prior
to inserting the food. Set the time for
cycle 1 to infinite [InF]; when the pre-
heating temperature has been reached, a
cyclical acoustic cycle will be heard and
the writing [LoA] will appear on the display
to notify that it is time to insert the food.
When the door is closed again, button
11 will show a second flashing LED,
indicating the activation of cooking cycle
2.
6.2 • SELECTING THE PROGRAMME
Press Recipe button 11, the display will read
[L01].
Turn knob 1 until the first free programme
is shown (cooking mode led is flashing
and programme number on display 7 is
flashing) and press knob 1 to confirm.
Caution
The programme is "new" when the cooking
mode button leds and the programme
number on display 7 are flashing.
The programme is "occupied" when
the cooking mode button leds and the
programme number on display 7 are fixed.
6.3 • SELECT THE COOKING MODE
Leds on cooking mode buttons flashing:
press the desired cooking mode button
(2 - 3 - 4). The cooking mode led will
remain lit with a fixed light.
6.4 • SETTING THE TEMPERATURE FOR
CYCLE 1
Press button 6, the temperature will flash
on display 7. Turn knob 1 to set the
temperature (right to increase, left to
decrease), which will be shown on the
display.
Press button 6 to confirm, or wait 10
seconds to confirm the set temperature.
Display 7 will now show the current
temperature in the cooking chamber.
6.5A • SETTING THE TIME FOR CYCLE 1
The time display reads [InF].
Press button 9, display 8 reads [0.00]. Turn
knob 1:
- to the right to set the cooking time;
- to the left to set an infinite time [InF] to
use the first cycle for pre-heating.
Press button 9 to confirm, or wait 10
seconds to confirm the set time.
Or
6.5B • SETTING THE CORE PROBE FOR
CYCLE 1
Press button 9, display 8 will show the
probe temperature. Turn knob 1 to set
the temperature (right to increase, left to
decrease), which will be shown on display
8.
Press button 9 to confirm, or wait 10
seconds to confirm the set probe
temperature.
See “Section 14 - Setting the Core Probe”.
OPERATIONS
6 • SETTING A PROGRAMME WITH SEQUENTIAL CYCLES (UP TO 4)
240066-1

turbofan EC40D7 Specifications

General

Brand	turbofan
Model	EC40D7
Category	Oven
Language	English