turbofan EC40D7 User Manual

21
14 • SETTING THE CORE PROBE
Premise
The core probe allows cooking regulated
by the product's core temperature. The
oven stops the cooking process as soon
as the core of the product reaches the set
temperature, without the need to set a
cooking time.
The core probe can easily be used as a
portable thermometer. In fact, with the oven
on in any time mode, when button 10 is
pressed, display 8 shows the temperature
of the probe pin for a few seconds. This
makes it possible to check the temperature
at the core of the product when it is not being
cooked, and therefore outside the oven itself.
OPERATIONS
14.1 • COOKING WITH THE CORE PROBE
If the first cycle is used for pre-heating, the
probe pin must be kept outside the cooking
chamber; otherwise the programme will not
be able to start.
Once the cooking temperature has been set
as per relative chapters on settings, insert
the probe into the product (see “Section 14 -
Setting the Core Probe"), and continue based
on the cooking method selected.
PRACTICAL EXAMPLE
Settings
Mode: Convection
Cooking chamber temperature: 140°C
Time: Infinite
Core temperature: 78°C
What happens
Once the core of the product reaches a
temperature of 78°C, with the cooking
chamber temperature at 140°C, heating will
stop and will automatically restart when the
core temperature reaches 1°C.
In essence, heating is no longer based on
the cooking chamber temperature, but
rather works with the selected core probe
temperature.
240066-1

turbofan EC40D7 Specifications

General

Brand	turbofan
Model	EC40D7
Category	Oven
Language	English