29
21
•
SPECIAL PROGRAMMES
MANUAL AND AUTOMATIC CLEANING
• PROPER CLEANING ...
...is the key to impeccable cooking and
improved final products:
• the flavour of products does not change;
• during cooking, no vapours are generated by
previous residue that subsequently burns;
• energy savings;
• less maintenance operations and a longer
oven life cycle;
• the simplicity of the procedure allows proper
cleaning in a short time, with minimal effort by
the operator
• CAUTION
Do not throw water or pressurised cleaning
water directly onto the external walls of the
oven.
Strictly avoid the use of corrosive and/
or abrasive substances, as well as steel
wool or iron brushes on steel surfaces, so as
not to permanently ruin them. Furthermore,
detergents that are too aggressive, non-
alkaline, or which contain high percentages
of sodium and ammonia, may prematurely
damage the gaskets, compromising the
oven’s seal.
External surfaces must be cleaned with a
sponge and warm water, with the addition of a
common detergent suitable for such scope.
• It is recommended to use a special-
purpose detergent.
• NOTE:
OPEN DOOR RAPID COOLING
This function is activated only when the
oven door is open. If button 12 is pressed
for 5 seconds, the fan is activated to
allow a rapid fall in the cooking chamber
temperature, up to 50°C. This function is
particularly useful in cases where the
oven needs to be immediately cleaned
after cooking.
240066-1