6
1 • GENERAL WARNINGS
• If technical assistance is required, all information included in the ID plate must be provided, as well as
detailed information about the fault so as to make it easier for the help service to understand and
resolve the problem.
• Ask the installer for instructions about the correct management of water softener, as insufficient or
poor maintenance is the main reason for the formation of limescale that is detrimental to the device.
• The room where the oven is installed must be well-ventilated!
• Each oven is equipped with an ID plate that states the oven model and its main technical features.
Following is an example of an electric oven plate.
• This manual is also available in electronic format.
Contact your help service.
2010
3N AC 400V 50Hz
IPX 5
NR XXXXXXXXXX
kPa
200 - 500
TOT 6.25 kW1 x 0.25 kW
TYP. XXXXXXXX
LOGO
240066-1
To Next Page
Loading...
Need help?
General
