04 ·
Optimized operating software
MEGA 400W×2 features the so-called AUTO function that set the feeding current during
the process of charging or discharging. Especially for Lithium batteries, it can prevent the
overcharging which may lead to an explosion due to the user's fault. It can disconnect the
circuit automatically and alarm once detecting any malfunction. All the programs of this
product were controlled through two way linkage and communication, to achieve the
maximum safety and minimize the trouble. All the settings can be configured by users!
Internal independent lithium battery balancer
MEGA 400W×2 employs an individual-cell-voltage balancer. It isn’t necessary to connect
an external balancer for balance charging.
Balancing individual cells battery discharging
During the process of discharging, MEGA 400W×2 can monitor and balance each cell of
the battery individually. Error message will be indicated and the process will be ended
automatically if the voltage of any single one cell is abnormal.
Set contents
Special features
SPECIAL FEATURES
1. MEGA 400W×2 Charger
2. XH Adaptor x 2Sets
3. Crocodile Clip Charging Cable
4. 18AWG Wire Charging Cable x 2Pcs
5. Plug-in Battery Clamps
1
2
3
4
5
To Next Page
Loading...
