What does 'No Water' mean on Tuttnauer 2840 ELV-D?
If your Tuttnauer Laboratory Equipment displays 'No Water', it means the electrode in the chamber did not sense water within the preset time. Here are the steps to troubleshoot: 1. Check and fix the mineral free water supply. 2. Check and clean the water inlet filter. 3. Clean the water level electrode.
What does 'Low Pressure' mean on my Tuttnauer Laboratory Equipment and how to resolve it?
The 'Low Pressure' message on your Tuttnauer Laboratory Equipment indicates that the chamber pressure dropped below the sterilization pressure (134°C = 304 kPa, 121°C = 205 kPa) for 2 seconds during the sterilization stage. Perform a new cycle.
What does 'Low Pressure (Cooling)' mean on Tuttnauer 2840 ELV-D?
If your Tuttnauer Laboratory Equipment displays 'Low Pressure (Cooling)', it means the pressure in the chamber did not reach the preset pressure before initiating the cooling stage. To resolve this, check and fix the compressed air supply.
What to do if the printer of my Tuttnauer Laboratory Equipment does not print?
If the printer of your Tuttnauer Laboratory Equipment isn't printing, first ensure that the paper roll is inserted correctly. If the issue persists, try switching the machine off and then back on to restart it.
What does 'High Pressure (Ending)' mean on my Tuttnauer Laboratory Equipment?
The 'High Pressure (Ending)' message on your Tuttnauer Laboratory Equipment indicates that the system could not reach atmospheric pressure ± 10kPa during the ending stage. Perform a new cycle.
What does 'Air Error' mean on my Tuttnauer Laboratory Equipment and how can I fix it?
The 'Air Error' message on your Tuttnauer Laboratory Equipment indicates that the autoclave did not reach atmospheric pressure after 100 minutes at the end of the cycle. Wait until the autoclave reaches atmospheric pressure and perform a new cycle.
What to do for 'Supply water error' on Tuttnauer 2840 ELV-D Laboratory Equipment?
If your Tuttnauer Laboratory Equipment displays 'Supply water error (digitat input option)', it indicates a malfunction in the city (tap) water supply. To resolve this, check and fix the city (tap) water supply.
What does 'Pressure Time Error' mean on Tuttnauer Laboratory Equipment?
If your Tuttnauer Laboratory Equipment displays 'Pressure Time Error', it means that the system cannot reach the required pressure conditions in the chamber, after preset time, during the air removal stage. To resolve this, verify that the autoclave is not overloaded.
What does 'High Pressure' mean on Tuttnauer 2840 ELV-D?
If your Tuttnauer Laboratory Equipment displays 'High Pressure', it means the chamber pressure rose 4.2 psi-29 kPa above sterilization pressure (134°C = 304 kPa, 121°C = 205 kPa) for 2 seconds during the sterilization stage. To resolve this, perform a new cycle.
What does 'High Temp. (Ending)' mean on Tuttnauer 2840 ELV-D Laboratory Equipment?
If your Tuttnauer Laboratory Equipment displays 'High Temp. (Ending)', it means the system couldn't reach the required temperature in the chamber within 10 minutes. To resolve this, simply perform a new cycle.
General| Brand | Tuttnauer |
|---|---|
| Model | 2840 ELV-D |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
