To Next PageTo Next PageWhat to do if my Tuttnauer EZ10 Laboratory Equipment displays ‘Low Temp’?
If your Tuttnauer Laboratory Equipment displays ‘Low Temp’, refer to the solutions for the ‘Low Water’ problem. Also, the sterilization time may have been set for too long, causing the chamber to run dry.
What to do if my Tuttnauer Laboratory Equipment displays ‘Low Pres’?
If your Tuttnauer Laboratory Equipment displays ‘Low Pres’, clean the water level electrode inside the vessel. Also, check that the door is fully closed, the door gasket is seated, and there is no steam leakage; replace the door gasket if necessary. Finally, check the leveling of the machine.
What to do if my Tuttnauer EZ10 Laboratory Equipment displays ‘High Temp’?
If your Tuttnauer Laboratory Equipment displays ‘High Temp’, clean the air jet. If this doesn't resolve the issue, it could be that the heating elements are remaining on instead of cycling on and off, or the temperature sensor (PT100) is faulty or dirty, in which case call for a technician.
What to do if my Tuttnauer Laboratory Equipment displays ‘Low Water’?
If your Tuttnauer Laboratory Equipment displays ‘Low Water’, clean the water level electrode inside the vessel. Check that the door is fully closed, the door gasket is seated, and there is no steam leakage. Replace the door gasket if necessary. Also, check the leveling of the machine.
What to do if my Tuttnauer EZ10 Laboratory Equipment displays ‘High Pres’?
If your Tuttnauer Laboratory Equipment displays 'High Pres', clean the air jet. Also, ensure the sterilization time and temperature are set correctly; if unsure, use the default settings. Verify that the autoclave is not overloaded.
Checks for damage to the shipping carton and autoclave upon receipt.
Details the two-year warranty for components and labor, excluding routine maintenance.
Instructions for warranty activation and repair authorization process.
Overview of the autoclave's purpose, design, and basic operation.
Explains the energy-saving standby mode feature for specific models.
Provides data on peak sound level and heat output.
Specifies conditions for indoor use, altitude, temperature, and humidity.
Lists power supply requirements (voltage, amperage).
Details the materials used for the autoclave's main parts.
Explains common symbols used in the manual and on the device.
Provides detailed electrical specifications like amperage, wattage, and fuse ratings.
Lists overall dimensions, reservoir volume, and pressure limits.
Details shipping volume, weight, cassette capacity, tray dimensions, and chamber size.
Lists compliance with technical and quality standards like ASME and ISO.
Specifies physical characteristics and contaminant limits for distilled/mineral-free water.
Visual layout and labeling of the autoclave's front panel controls.
Explains the function of various indicator lights on the control panel.
Details the function and use of the main sterilization program selection keys.
Explains the function of keys like TEMP, TIME, UP/DN, CLOCK, Water Inlet, START, STOP.
Explains how the display panel shows parameters, messages, and status.
Details error messages and safety indicators like Door Unlock, Man. Stop, Add Water.
Explains common error messages like Low Heat, Low Pres, High Pres, Low Temp, High Temp.
Explains messages like Power Dn., CYC Finish, and their implications.
Details default settings and operations for unwrapped instrument sterilization.
Details settings and operations for wrapped items and porous loads.
Details settings and operations for glassware sterilization.
Explains the use of the accessory program for enhanced drying.
Describes the printer's function, output, and data logging capabilities.
Step-by-step instructions for loading paper and performing printer tests.
Guidelines for safe and compliant electrical hookup, including safety relays.
Procedures for automatic and manual water filling, and checking the fill level.
Safety precautions and procedures for moving the autoclave.
Guidelines for safely loading, unloading, and securing the autoclave.
Instructions on how to properly fill the water reservoir with distilled water.
Steps for cleaning, rinsing, and preparing instruments for sterilization.
Methods for packaging items and loading trays for effective sterilization.
Explains causes and solutions for spotting and discoloration on instruments.
Steps for powering on, setting clock, and selecting a sterilization program.
How to start a cycle, ensure proper door seal, and interpret stage indicators.
Outlines daily, weekly, and periodic maintenance tasks.
Step-by-step guide for replacing the HEPA air filter.
Procedure for safely draining the water reservoir.
Instructions for cleaning the air jet to prevent spore test failures.
Guide on how to remove and install a new door gasket.
Monthly procedure to ensure the safety valve is not blocked.
Instructions for safely replacing blown fuses.
Procedure for cleaning the water outlet strainer.
Step-by-step guide for cleaning the autoclave chamber using Chamber Brite.
Weekly procedure for cleaning the water sensor in the chamber.
Solutions for issues like the machine not responding or displaying 'Low Heat'.
Solutions for 'Low Water', 'Low Pres', and 'Low Temp' error messages.
Troubleshooting for 'High Temp', 'High Pres', and printer problems.
Solutions for door leaks, slow exhaust, chamber/tray cleaning.
General| Type | Automatic Autoclave |
|---|---|
| Frequency | 50/60Hz |
| Max Temperature | 273°F (134°C) |
| Sterilization Temperature Range | 250°F - 273°F (121°C - 134°C) |
| Warranty | 1 year parts and labor |
| Chamber Volume | 6 Gallons (23 Liters) |
| Voltage | 120V |
| Sterilization Cycle Time | Approx. 20-30 minutes |
| Power Requirements | 230V |
| Chamber Dimensions | 10 x 19 inches |
| Chamber Size | 10.2" x 18.1" (260mm x 460mm) |
| Standard Cassettes Capacity | 3 Full / 3 Half |
