Multi Format LCD Monitor 35
[1] SOFTWARE UPGRADE
6. Firmware Upgrade
● USB memory stick(Thumb drive) that has
F/W is necessary.
● Select Display&Set menu
- Connect USB memory stick to USB slot in
front of the monitor.
- Set [S/W upgrade] as [On].
- If USB memory stick is connected correctly,
[S/W upgrade start] is activated.
* if the item is not activated, please disconnect
and connect the USB memory stick again.
After 5 sec. do the same procedure.
- The monitor searchs USB memory stick. - Select [Yes] in [S/W upgrade start] and
proceed the rmware update.
* During the update, the monitor screen is o,
and nothing functions.
* After the update, TVLogic logo shows up on
the screen, and the monitor initializes.
* Update can take 10~20min. depending on
rmware kind.
To Next Page
Loading...
Need help?
General
