lever. It returns to its original position
automatically.
1. Front brake lever
Front brake is applied while pressing this
lever gently towards throttle grip. Brake lamp
will glow on the application of front brake.
2. Throttle grip
Rotating the grip towards you will raise the
engine. To reduce the engine RPM just leave
the throttle.
3. Headlamp control switch
The switch to operate head lamp is given on
right side. It has three positions as shown
below :
OFF ( ) : Head lamp, tail lamp and
speedometer lamps are off despite of engine
KNOW ABOUT YOUR TVS DAZZ
HANDLE BAR RIGHT SIDE
14
1
2
3
4
To Next Page
Loading...
