3. Insert a cushion between the brake disc brake
to avoid binding.
4. Follow the reverse steps above to replace the
front wheel.
Bulb replacement
1. Open the screw on the handle of the front cover
using a screwdriver.
2. Open the special screws (4 pieces) of the front
cover using a screwdriver.
3. Separate the handle cover and remove the
front headlamp wiring connector and remove
the cover from the front handle.
4. Separate cover headlamp.
5. Rotate the headlamp holder clockwise and
release.
6. Remove and Replace bulb with a new one.
7. When reassembling make sure the appropriate
groove in the headlamp.
MAINTENANCE
37
To Next Page
Loading...
