Spark Plug
To remove the spark plug cover center opening :
1. Vehicles must be in a condition to use the center
stand .
2. Open and remove the four screws located in the
center cover the middle and lower vehicle must be
in a condition to use the center stand.
3. Remove the cover center.
Spark plug electrode gap : 0.7 mm
MAINTENANCE
Recommendation spark plug BOSCH - UR4KC
4. Remove the spark plug from cylinder head using
a plug spanner from the tool kit. Clean the spark
plug and check the spark plug electrode gap. If the
gap does not match as per specifications, set it.
5. For installation follow the above steps in reverse
order.
7
28
To Next Page
Loading...
